Multiple Vulnerabilities in Citrix Products Could Allow For Disclosure Of Sensitive Data

Multiple vulnerabilities have been discovered in Citrix products, the most severe of which could allow disclosure of sensitive data. Citrix ADC performs application-specific traffic analysis to intelligently distribute, optimize, and secure Layer 4 - Layer 7 network traffic for web applications. Successful exploitation of the most severe of these vulnerabilities could allow for memory overread, leading to disclosure of potentially sensitive information such as authenticated session tokens. Depending on the sensitive information retrieved via this technique, the attacker may gain further access to the appliance or systems.

There are currently no reports of the vulnerabilities being exploited.

Multiple vulnerabilities have been discovered in Citrix products, the most severe of which could allow disclosure of sensitive data. Details of the most severe vulnerabilities are as follows:

Tactic: Initial Access (TA0001):

Technique: Exploit Public-Facing Application (T1190):

• An out-of-bounds read vulnerability in NetScaler ADC and NetScaler Gateway affecting systems configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server. It stems from insufficient input validation. Successful exploitation allows a remote, unauthenticated threat actor to trigger memory overreads on the affected interface. (CVE-2025-5777)

Additional lower severity vulnerabilities:

• An improper access control vulnerability in the NetScaler Management Interface of NetScaler ADC and NetScaler Gateway, affecting version 14.1 before 14.1-43.56 and version 13.1 before 13.1-58.32. It stems from insufficient enforcement of access restrictions on management endpoints. Successful exploitation allows an unauthenticated threat actor with access to the NSIP (NetScaler IP for management), Cluster Management IP, or local GSLB (Global Server Load Balancing) Site IP to interact with restricted management functions. (CVE-2025-5349)

Successful exploitation of the most severe of these vulnerabilities could allow for memory overread, leading to disclosure of potentially sensitive information such as authenticated session tokens. Depending on the sensitive information retrieved via this technique, the attacker may gain further access to the appliance or systems.

We recommend the following actions be taken:

• Apply the stable channel update provided by Citrix to vulnerable systems immediately after appropriate testing. (M1051: Update Software)
• Safeguard 7.1 : Establish and Maintain a Vulnerability Management Process: Establish and maintain a documented vulnerability management process for enterprise assets. Review and update documentation annually, or when significant enterprise changes occur that could impact this Safeguard.
• Safeguard 7.2 : Establish and Maintain a Remediation Process: Establish and maintain a risk-based remediation strategy documented in a remediation process, with monthly, or more frequent, reviews.
• Safeguard 7.6 : Perform Automated Vulnerability Scans of Externally-Exposed Enterprise Assets: Perform automated vulnerability scans of externally-exposed enterprise assets using a SCAP-compliant vulnerability scanning tool. Perform scans on a monthly, or more frequent, basis.
• Safeguard 7.7 : Remediate Detected Vulnerabilities: Remediate detected vulnerabilities in software through processes and tooling on a monthly, or more frequent, basis, based on the remediation process.
• Safeguard 16.13 Conduct Application Penetration Testing: Conduct application penetration testing. For critical applications, authenticated penetration testing is better suited to finding business logic vulnerabilities than code scanning and automated security testing. Penetration testing relies on the skill of the tester to manually manipulate an application as an authenticated and unauthenticated user.
• Safeguard 18.1 : Establish and Maintain a Penetration Testing Program: Establish and maintain a penetration testing program appropriate to the size, complexity, and maturity of the enterprise. Penetration testing program characteristics include scope, such as network, web application, Application Programming Interface (API), hosted services, and physical premise controls; frequency; limitations, such as acceptable hours, and excluded attack types; point of contact information; remediation, such as how findings will be routed internally; and retrospective requirements.
• Safeguard 18.2 : Perform Periodic External Penetration Tests: Perform periodic external penetration tests based on program requirements, no less than annually. External penetration testing must include enterprise and environmental reconnaissance to detect exploitable information. Penetration testing requires specialized skills and experience and must be conducted through a qualified party. The testing may be clear box or opaque box.
• Safeguard 18.3 : Remediate Penetration Test Findings: Remediate penetration test findings based on the enterprise’s policy for remediation scope and prioritization.

• Citrix recommends running the following commands to terminate all active ICA and PCoIP sessions after the appliances have been upgraded:
• kill icaconnection -all
• kill pcoipConnection -all

• Apply the Principle of Least Privilege to all systems and services. Run all software as a non-privileged user (one without administrative privileges) to diminish the effects of a successful attack. (M1026: Privileged Account Management)
• Safeguard 4.7: Manage Default Accounts on Enterprise Assets and Software: Manage default accounts on enterprise assets and software, such as root, administrator, and other pre-configured vendor accounts. Example implementations can include: disabling default accounts or making them unusable.
• Safeguard 5.4: Restrict Administrator Privileges to Dedicated Administrator Accounts: Restrict administrator privileges to dedicated administrator accounts on enterprise assets. Conduct general computing activities, such as internet browsing, email, and productivity suite use, from the user’s primary, non-privileged account.
• Restrict use of certain websites, block downloads/attachments, block Javascript, restrict browser extensions, etc. (M1021: Restrict Web-Based Content)
• Safeguard 2.3: Address Unauthorized Software: Ensure that unauthorized software is either removed from use on enterprise assets or receives a documented exception. Review monthly, or more frequently.
• Safeguard 2.7: Allowlist Authorized Scripts: Use technical controls, such as digital signatures and version control, to ensure that only authorized scripts, such as specific .ps1, .py, etc., files, are allowed to execute. Block unauthorized scripts from executing. Reassessbi-annually, or more frequently.
• Safeguard 9.3: Maintain and Enforce Network-Based URL Filters: Enforce and update network-based URL filters to limit an enterprise asset from connecting to potentially malicious or unapproved websites. Example implementations include category-based filtering, reputation-based filtering, or through the use of block lists. Enforce filters for all enterprise assets.
• Safeguard 9.6: Block Unnecessary File Types: Block unnecessary file types attempting to enter the enterprise’s email gateway.
• Use capabilities to detect and block conditions that may lead to or be indicative of a software exploit occurring. (M1050: Exploit Protection)
• Safeguard 10.5: Enable Anti-Exploitation Features: Enable anti-exploitation features on enterprise assets and software, where possible, such as Microsoft® Data Execution Prevention (DEP), Windows® Defender Exploit Guard (WDEG), or Apple® System Integrity Protection (SIP) and Gatekeeper™.
• Block execution of code on a system through application control, and/or script blocking. (M1038: Execution Prevention)
• Safeguard 2.5 : Allowlist Authorized Software: Use technical controls, such as application allowlisting, to ensure that only authorized software can execute or be accessed. Reassess bi-annually, or more frequently.
• Safeguard 2.6 : Allowlist Authorized Libraries: Use technical controls to ensure that only authorized software libraries, such as specific .dll, .ocx, .so, etc., files, are allowed to load into a system process. Block unauthorized libraries from loading into a system process. Reassess bi-annually, or more frequently.
• Safeguard 2.7 : Allowlist Authorized Scripts: Use technical controls, such as digital signatures and version control, to ensure that only authorized scripts, such as specific .ps1, .py, etc., files, are allowed to execute. Block unauthorized scripts from executing. Reassess bi-annually, or more frequently.
• Use capabilities to prevent suspicious behavior patterns from occurring on endpoint systems. This could include suspicious process, file, API call, etc. behavior. (M1040: Behavior Prevention on Endpoint)
• Safeguard 13.2 : Deploy a Host-Based Intrusion Detection Solution: Deploy a host-based intrusion detection solution on enterprise assets, where appropriate and/or supported.
• Safeguard 13.7 : Deploy a Host-Based Intrusion Prevention Solution: Deploy a host-based intrusion prevention solution on enterprise assets, where appropriate and/or supported. Example implementations include use of an Endpoint Detection and Response (EDR) client or host-based IPS agent.